Cost Guide · 2026
Hydro jetting cost in South Florida
Storm drain hydro-jetting in South Florida typically runs $3–$25 per linear foot. Small, clean pipe with light debris is on the low end; large trunk lines with roots or hardened sediment are on the high end. If the storm drain is holding water, expect a 30–60% surcharge for dewatering and continuous vacuum recovery.
Transparent pricing
Published ranges based on real South Florida jobs. Every job receives a written, fixed-fee quote — request a free quote today.
| Service | Typical scope | Price range |
|---|---|---|
| Small pipe (≤15") — light debris | Sand, leaves, no standing water | $3 – $6 / LF |
| Small pipe (≤15") — heavy debris | Roots, hardened sediment, partial blockage | $6 – $12 / LF |
| Medium pipe (18–24") — standard | Typical HOA / commercial trunk lines | $8 – $15 / LF |
| Large pipe (30"+) | High-flow trunk lines, larger nozzle | $12 – $25 / LF |
| Water-holding / submerged line | Requires dewatering, higher recovery cost | +30 – 60% surcharge |
| Mobilization (standalone) | Trip + setup when not bundled | $150 – $400 |
Ranges reflect South Florida commercial / HOA market rates as of 2026. Final quote depends on pipe diameter, condition, length, and whether the line is submerged.
What moves your per-foot price
- Pipe diameter — larger pipe needs larger nozzles and more water volume.
- Debris type — soft silt jets fast; roots, grease, and hardened concrete slurry take multiple passes.
- Whether it's holding water — a submerged line needs a vac truck running the whole time; expect 30–60% more.
- Length — longer continuous runs get a lower per-foot rate; short one-off segments carry more mobilization.
- Access — can we back the jetter to the upstream structure, or do we need traffic control and long hose pulls?
FAQ
Frequently asked questions
How much does hydro-jetting a storm drain cost?
In South Florida, hydro-jetting runs $3–$25 per linear foot depending on pipe diameter, debris severity, and whether the line is holding water. Small clean pipe is $3–$6/LF; large trunk lines with heavy debris hit $15–$25/LF. Standing-water lines add 30–60% for dewatering.
Why does a water-holding pipe cost more?
When a storm drain is submerged or won't drain, the jet crew has to vacuum out water at the downstream structure continuously to keep the line workable, and the nozzle can't verify progress visually. It's more crew, more truck time, and often a follow-up CCTV pass.
What determines the per-foot price?
Four things: (1) pipe diameter — larger pipe needs larger nozzles and higher water volume, (2) debris type — soft silt jets fast; roots and hardened FOG take multiple passes, (3) length — longer runs get a lower per-foot rate, and (4) access — can we back the jetter to the upstream structure?
Do I need CCTV afterward?
Not always. For routine PM we skip it. For root intrusion, recurring blockages, or before a recertification, add before/after CCTV at $10–$20/LF to prove the line is clear.
Is basin cleaning included?
No — jetting is the pipe. The basins on either end need vacuuming separately ($100–$500 each). Most jobs bundle both on one mobilization to save the trip charge.
Free Quote
Get a per-foot quote for your storm line
Tell us pipe size, length, and what you're seeing — we'll come back with a fixed price in 48 hours.